Vsmile HappyGlow Stain&Glaze Aesthetic Kit (One for All)
HappyGlow Stain & Glaze Kit is a universal range of Stain and Glaze materials suitable for the individualized characterization, staining and glazing. The materials are designed to create true-to-nature restorations made of zirconium oxide or lithium disilicate, all-ceramics or metal-supported ceramics.
Glaze Paste(5g) :Universal Glaze
Glaze Liquid(15ml):Universal Glaze Liquid
Step 1: Preparation
Clean the restoration surface thoroughly, removing any debris or contaminants.
Ensure that the restoration is properly sintered or fired according to the manufacturer's instructions.
Step 2: Glaze Application
Select the desired glaze from the HappyGlow Stain & Glaze Kit based on the desired esthetic outcome.
Mix the glaze using a spatula or brush until it reaches a smooth and homogeneous consistency.
Apply a thin and even layer of the glaze onto the restoration surface using a brush or applicator. Take care to avoid excess application or pooling of the glaze.
Allow the glaze to dry completely before proceeding to the firing process. Follow the recommended drying time provided by the manufacturer.
Step 3: Stain Application
Choose the appropriate stain from the HappyGlow Stain & Glaze Kit to achieve the desired surface texture and color effects.
Mix the stain using a spatula or brush until it reaches a smooth and homogeneous consistency.
Apply the stain onto the glazed surface using a brush or applicator, following the desired pattern or texture.
Allow the stain to dry completely before proceeding to the firing process. Follow the recommended drying time provided by the manufacturer.
Computer Program Summary Name | Starting Temperature | Drying Time | Temperature Rise per Minute | Vacuum Amount | Vacuum Start | Vacuum Release | Maximum Temperature | Dwell | Cooling |
E.MAX porcelain powder, glazing, dyeing | 500 | 4:00 | 45 | 0 | 0 | 0 | 725 | 1:00 | 3 |
E.MAX veneers/inlays, glazing, staining | 500 | 4:00 | 45 | 0 | 0 | 0 | 780 | 1:00 | 3 |
Zirconia full contour, glazed, dyed | 500 | 4:00 | 45 | 0 | 0 | 0 | 900 | 1:00 | 3 |
All-ceramic glazing and staining | 500 | 4:00 | 45 | 0 | 0 | 0 | 870 | 1:00 | 3 |
Glazing and dyeing of glass pottery teeth | 500 | 4:00 | 45 | 0 | 0 | 0 | 770 | 1:00 | 3 |
Metal porcelain glazing and dyeing | 500 | 4:00 | 45 | 0 | 0 | 0 | 870 | 1:00 | 3 |
Pure titanium porcelain glazed and dyed | 500 | 4:00 | 45 | 0 | 0 | 0 | 760 | 1:00 | 3 |
Note: Since there is a slight temperature difference between different brands of porcelain furnaces, the above is for reference only. | |||||||||
Step 4: Firing
Place the glazed and stain-applied restoration in a suitable firing furnace according to the recommended firing parameters for the specific dental ceramics.
Follow the firing cycle recommended by the manufacturer for the type of restoration, glaze, and stain.
Monitor the firing process closely to ensure proper fusion and adherence of the glaze and stain to the restoration surface.
Once the firing cycle is complete, allow the restoration to cool down naturally before handling.
Finishing and Polishing:
After the restoration has cooled down, inspect the glazed and stain-applied surface for any imperfections or irregularities.
If necessary, perform any required adjustments, polishing, or additional firing cycles to achieve the desired esthetic outcome.
Utilize appropriate polishing tools and techniques to achieve a smooth and natural-looking finish.
Storage and Shelf Life:
Store the HappyGlow Stain & Glaze Kit in a cool and dry place, away from direct sunlight.
Ensure that the containers are tightly sealed after each use to prevent drying or contamination.
Check the expiration dates on the packaging and avoid using the products beyond their shelf life.
