Dental soft Cocr metal Alloy
98mm
Processed by special technology.Suitable for various types of processing systems to produce metal inner crown.The denture produced by this product is non-toxic,non radioactive,excellent biocompatibility, is not easy to produce allergic phenomenon,corrosion resistance;After vacuum sintering, the color of the substrate is silver.Aftersintering, the ceramic has good aesthetic appearance.The produc thas the advantagesof high strength, long clinical use time, simple process,good toughness and excellentwear resistance.
Quantity
Dental Base Metal Alloy
product name ,specifications and models and ClassificationProduct specifications and models:see labeling
Classsification: According to the rule of MDD 93/42/EEC, Annex lX,the product is for long term using device,non-active and invasivemedical device, which correspond with the rule 8.So it be longs tothe classification lla.
Classsification: According to the rule of MDD 93/42/EEC, Annex lX,the product is for long term using device,non-active and invasivemedical device, which correspond with the rule 8.So it be longs tothe classification lla.
Properties
Intended use
Dental Base Metal Allay is intended for use in fabrication of cast or porcelain-fused-to metall crown and bridge restorations,
Operation method
Open the package to take out the metall block. Process the metal block in the Vsmile special cutting equipment for dental application.Conduct high temperature sintering on it through the XT-S series sintering furnace, and thensubject it to grinding, cerarmic coating and glazing by professional technicians.Finally, the tlinished product will be refined, implanted, and applied by the dentistto the patient
Chemical components
Base metal alloy sintering temperature
Operation instructions
Place the dental base metal alloy to the die,and fix it with corresponding retainingscrews.
When replacing the dental base metal alloy, be sure to clean the die, in order to avoid anybreakage due to the uneven installation. Iln particular,when the alloy is transferred fromthe wet processing equipment to the dry processing equipment, the processing chambershall be kept dry. When determining the processing size, please refer to the expansionratio we provide, in order to ensure that the sinter size meets the patient's requirement.
For the technical parameters and instructions for fabricating specific crowns, bridges andpost core, please refer to the technical guidelines we provide or the industry specifications.Details shall be paid close attention to in the operation of the processing equipment. Pleaserefer to the technical guideline for the operation of the processing equipment.
The engraved crown shall be cut with cross-shaped hard alloy knife. When theprocessed restoration framework is removed from the dental base metal alloy ,appropriate brush shall be used to clean the impurity (e.g. dust) from it.Pay attentionthat this product shall not be cut by laser or placed in damp environment.
