HappyZir 98mm/95mm/71mm ST Super Translucency Pre-shaded Zirconia Disc
Recommend Temperature: 1480-1530℃
Indications: Full contour crown bridge, Full arch, implants
High translucent zirconium oxide for perfect aesthetics
VsmileST Pre-Shaded ZirconiaDisc can be customized individually by brush or dipping infiltration or processed as a pre-shaded variant. All-ceramic veneering is possible with the common all-ceramic systems .
Processing OptionsMonolithic processing or partial ceramic veneering
- Single-tooth restorations ( posterior)
- 3-unit bridges (posterior)
- Multi-unit bridges (posterior)
- Full arch
- 98mm (10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm,30mm) For Open System
- 71mm (10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm) For Amann Girrbach CERAMILL CAD/CAM SYSTEM
- 95mm (10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm) For Zirkonzahn CAD/CAM SYSTEM
ColorsVita 16 Shades
Thickness ranges from 10mm,12mm,14mm,16mm,18mm,20mm,22mm
and 25mm.Compatible with Roland,Wieland,VHF,Amann Girrbach,Yenadent and
other most open CAD CAM milling machines.
Cold isostatic pressing
All of our blocks are isostatically pressed to insure a uniform shrinkage and density by the sintering process.
Work with Tosoh zirconia powder
We can keep a good quality know-how in powder comparable with Tosoh ,while keep cost competitive and most fine powder from China,due to their high-ranking properties for purity and quality to make our disks the best they can be.
100% safe every time
Our Zirconia blanks are allergen-free and bio-inert. It will not transmit heat or cold from the mouth to the
surrounding bone.You can use it confidently and safely.
Take care of your mill
Vsmile zirconia pucks are softer than the generic zirconia.Which can well take care of your spindle and other milling
tools,you can use them much longer.
Zirconia Blocks Production Process